Vandermoon Winthermo - Camper Van Thermal Window Blind
Vandermoon Winthermo - Camper Van Thermal Window Blind
Tackle three essential van challenges with a single solution.Â
Winthermo combines thermal insulation, blackout capability, and insect protection—eliminating the need for multiple separate products. Built with removable ONDUTERM insulation layered into hardwearing Kordura fabric, this blind gives you complete command over your van's temperature, light, and ventilation.
The independent mosquito net sits behind a YKK zipper—the same durable standard expedition tent makers rely on—and rolls away when you need full window access. Magnetic technology featuring 35 neodymium magnets powers instant operation.
Deploy complete darkness or partial coverage in seconds using an accordion fold motion. Snap buttons keep the blind neatly rolled when you want natural light. No pull cords, no complicated cassette systems.
The YKK zipper withstands hundreds of cycles without degradation, while the flexible design means you're never locked into one configuration. Adjust coverage to suit your needs throughout the day.
Perfect for van dwellers seeking practical climate control and privacy without compromise.
Mosquito Net That Lasts
Mosquito net mounted on YKK zipper. The same standard used by expedition tent manufacturers. It will withstand hundreds of openings and closings.
When you don't need the mosquito net – roll it up. You have full, unrestricted access to the window without dismantling the entire system.
Winthermo Installation
Position Winthermo in the window opening in the target position. Through the prepared eyelets (6 mm grommets), mark with a marker the first three points: two extreme points at the top and one center point. Set Winthermo aside, drill holes with a drill bit matched to your chosen rivet nuts and tighten them with a rivet nut tool. Attach Winthermo to the three installed rivet nuts using bolts.
Now trace the remaining mounting points through the remaining eyelets. Unscrew Winthermo, drill the remaining holes and tighten the rivet nuts. Finally, screw Winthermo in at all mounting points – done.
Note:Â Rivet nuts and bolts are not included in the kit. We recommend M5 or M6 rivet nuts and matching bolts.
Required tools:Â Drill, rivet nut tool, screwdriver or drill driver, marker.
Vandermoon Winthermo - Camper Van Thermal Window Blind
Tackle three essential van challenges with a single solution.Â
Winthermo combines thermal insulation, blackout capability, and insect protection—eliminating the need for multiple separate products. Built with removable ONDUTERM insulation layered into hardwearing Kordura fabric, this blind gives you complete command over your van's temperature, light, and ventilation.
The independent mosquito net sits behind a YKK zipper—the same durable standard expedition tent makers rely on—and rolls away when you need full window access. Magnetic technology featuring 35 neodymium magnets powers instant operation.
Deploy complete darkness or partial coverage in seconds using an accordion fold motion. Snap buttons keep the blind neatly rolled when you want natural light. No pull cords, no complicated cassette systems.
The YKK zipper withstands hundreds of cycles without degradation, while the flexible design means you're never locked into one configuration. Adjust coverage to suit your needs throughout the day.
Perfect for van dwellers seeking practical climate control and privacy without compromise.
Mosquito Net That Lasts
Mosquito net mounted on YKK zipper. The same standard used by expedition tent manufacturers. It will withstand hundreds of openings and closings.
When you don't need the mosquito net – roll it up. You have full, unrestricted access to the window without dismantling the entire system.
Winthermo Installation
Position Winthermo in the window opening in the target position. Through the prepared eyelets (6 mm grommets), mark with a marker the first three points: two extreme points at the top and one center point. Set Winthermo aside, drill holes with a drill bit matched to your chosen rivet nuts and tighten them with a rivet nut tool. Attach Winthermo to the three installed rivet nuts using bolts.
Now trace the remaining mounting points through the remaining eyelets. Unscrew Winthermo, drill the remaining holes and tighten the rivet nuts. Finally, screw Winthermo in at all mounting points – done.
Note:Â Rivet nuts and bolts are not included in the kit. We recommend M5 or M6 rivet nuts and matching bolts.
Required tools:Â Drill, rivet nut tool, screwdriver or drill driver, marker.
Original: $342.33
-65%$342.33
$119.82Description
Vandermoon Winthermo - Camper Van Thermal Window Blind
Tackle three essential van challenges with a single solution.Â
Winthermo combines thermal insulation, blackout capability, and insect protection—eliminating the need for multiple separate products. Built with removable ONDUTERM insulation layered into hardwearing Kordura fabric, this blind gives you complete command over your van's temperature, light, and ventilation.
The independent mosquito net sits behind a YKK zipper—the same durable standard expedition tent makers rely on—and rolls away when you need full window access. Magnetic technology featuring 35 neodymium magnets powers instant operation.
Deploy complete darkness or partial coverage in seconds using an accordion fold motion. Snap buttons keep the blind neatly rolled when you want natural light. No pull cords, no complicated cassette systems.
The YKK zipper withstands hundreds of cycles without degradation, while the flexible design means you're never locked into one configuration. Adjust coverage to suit your needs throughout the day.
Perfect for van dwellers seeking practical climate control and privacy without compromise.
Mosquito Net That Lasts
Mosquito net mounted on YKK zipper. The same standard used by expedition tent manufacturers. It will withstand hundreds of openings and closings.
When you don't need the mosquito net – roll it up. You have full, unrestricted access to the window without dismantling the entire system.
Winthermo Installation
Position Winthermo in the window opening in the target position. Through the prepared eyelets (6 mm grommets), mark with a marker the first three points: two extreme points at the top and one center point. Set Winthermo aside, drill holes with a drill bit matched to your chosen rivet nuts and tighten them with a rivet nut tool. Attach Winthermo to the three installed rivet nuts using bolts.
Now trace the remaining mounting points through the remaining eyelets. Unscrew Winthermo, drill the remaining holes and tighten the rivet nuts. Finally, screw Winthermo in at all mounting points – done.
Note:Â Rivet nuts and bolts are not included in the kit. We recommend M5 or M6 rivet nuts and matching bolts.
Required tools:Â Drill, rivet nut tool, screwdriver or drill driver, marker.
